A6VM series oblique axis plunger hydraulic motorA6VM80HA1
Model：A6VM80HA1/63W-VAB380A-SK
Name：A6VM series oblique axis axial piston variable displacement motor
Application scenarios：Suitable for walking machinery and industrial fields, etc
- specifications： 80cc/rev
- Rated pressure： 400bar
- Maximum pressure： 450bar
- Rated speed： 3900rpm
- Maximum speed： 6150rpm
- Product features
- Technical requirement
- Product parameter
Through a wide adjustment range, the variable motor can meet the requirements of high speed and large torque, suitable for open or closed hydraulic transmission circuits;
The control mode is automatic control related to HA1 and high voltage;
Equipped with BVD20F27S balance valve;
The bearing system has a compact structure, is sturdy and durable, and has a long service life;
High power density, large range of oblique axis swing;
After installing the motor, inject 46 # hydraulic oil and confirm with the oil level gauge;
Except for the parts marked with dashed lines, the rest should be painted;
Assembly product testing program:
1) Sealing test: After sealing, conduct an airtightness test, and the test time should exceed 3 minutes under 0.2Mpa atmospheric pressure.
2) Operation: The overall deviation of the small gear should be within 0.5mm;
Spray coating
Motor
1) Status: First floor
2) Thickness: Over 30um
3) Color: Gray
4) Polyurethane resin
See test specifications.
| model | A6VM80HA1/63w-VAB380A-SK |
| Maximum displacement | 80mL/r |
| Set minimum displacement | 30.2ml/r(Adjustable) |
| Rotation direction | two-way |
| speed | Rated speed:3900rpm Maximum speed:6150rpm |
| System allowable pressure | Rated pressure:400bar Maximum pressure:450bar |
| Shell pressure | rated:3bar peak value:5bar |
| control mode | HA1 and automatic control related to high voltage |
| Installing flanges | SAE flange, stop: 140mm, mounting hole 4-13.5, mounting hole indexing circle 180mm |
| output shaft | W35×2×16×9g DIN5480 |
| Main oil port | DN25; M12 x 1.75; SAE J518 1, oil ports A and B are located behind the rear |
| Shell oil drain port | G1/2 |
| System pressure tap | M18×1.5 |
| Synchronous control oil port | M14×1.5 |
| Attachment valve group | BVD20F27S balance valve |
